[step-manufacturing] Part 21 e3 DIS testing

[Martin Hardwick]

Hi Ed,

We are planning to use the AS1-AC model(see below) for the assembly test 
case and I think it will be more interesting if we use this for the PMI 
test case as well, especially if we can show unique PMI for each of the 
nut-bolt assemblies.

We are planning to start holding bi-weekly conference calls (on the ISO 
web site) starting next Tuesday at 10AM (Eastern USA). Please let me 
know if this is a good day and time for you. Other USA morning times are 
also possible except Wednesday.

We will use the first conference call to confirm the first deliverables 
for the end of the month

Martin



On 5/13/2014 10:06 AM, Paff, Ed wrote:
> Martin, do we care what model we use for the pmi test case...
>
> -----Original Message-----
> From: Martin Hardwick [mailto:hardwick at steptools.com]
> Sent: Thursday, May 08, 2014 9:21 AM
> To: thomas thurman
> Cc: wg11; Paff, Ed; step-manufacturing at steptools.com
> Subject: Part 21 e3 DIS testing
>
>
> Hi Tom,
>
> Good idea. Would you be able to make the file(s) and put them on the ISO web site?
>
> There are some examples in Annex K of the DIS.
>
> If you can do this then we can modify our tool kit software to recognize the new URL's.
>
> We want to have reasonably robust examples to show the CAX-IF at their meeting in September so I would  propose the following schedule:
>
> 1. May 30 First draft for review by the team (examples illustrate the major points) 2. June 30 Second draft for review by the team (files nearly ready for
> deployment)
> 3. July 31  Files available on new web site 4. August 31 Tool kit vendors demonstrate ability to read and write the new data
>
> We have similar schedules for the other three demonstrators (PMI References, ZIP Assemblies and Digital Signatures)
>
> Martin
>
> On 5/7/2014 5:02 PM, thomas thurman wrote:
>> Martin,
>> Great work this week.
>> Can we add to the test plan to provide a test of persistent units file on standards.iso.org?
>>
>> Best Regards,
>> Tom
>> On May 7, 2014, at 4:57 PM, Martin Hardwick <hardwick at steptools.com> wrote:
>>
>>> All,
>>>
>>> I am attaching the slides we used to review Edition 3 of Part 21 at the Philadelphia SC4 meeting.
>>>
>>> The new edition is currently out for DIS ballot and  SC4 P-member countries have been asked to return their votes and comments by September 11, 2014.
>>>
>>> Contact your local representative for more details and please help them review the document.
>>>
>>> The major new enhancement is the addition of new sections to manage anchors, references and digital signatures.
>>>
>>> We believe these new features will help make STEP data more modular and shareable as well as more trusted.
>>>
>>> Please contact me if you have any questions.
>>>
>>> Martin Hardwick
>>> Professor of Computer Science, RPI
>>> Team Leader ISO STEP-Manufacturing
>>> President STEP Tools, Inc.
>>>
>>>
>>>
>>>
>>> <p21e3_philly_review.pptx>___________________________________________
>>> ____
>>> wg11 mailing list
>>> wg11 at steptools.com
>>> http://lists.steptools.com/mailman/listinfo/wg11
>> Notice: This e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be legally privileged.  If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited.  Please reply to the sender that you have received the message in error, then delete it.  Thank you.
>>
>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20140513/72eab072/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dcaabihc.png
Type: image/png
Size: 76900 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20140513/72eab072/attachment.png>