[step-manufacturing] Fwd: Connection details and data for 1st CAM to CAM data exchange meeting

[Martin Hardwick]

All,

We will start again tomorrow (Tuesday) morning at 8:30AM Eastern.

Martin

-------- Original Message --------
Subject: 	[step-manufacturing] Connection details and data for 1st CAM 
to CAM data exchange meeting
Date: 	Fri, 21 Jun 2013 09:25:36 -0400
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com <step-manufacturing at steptools.com>



All,

We will start the telecon for the face to face meeting at 8:30AM 
(Eastern) on Monday. The connection details are the regular ones and 
copied below.

The team has made two data sets for the meeting.

1. A mold machining program for the CAM-Tooling pilot.
ftp://www.steptools.com/private/CAM_exchange/Cycle_2/MOLDY.p21

This is the first CC2 program exported directly from Catia.

2. A dummy panel model for the Made-to-Measure pilot.
ftp://www.steptools.com/private/CAM_exchange/Cycle_2/NIST_Panel_Test_AP242.stp

We will spend some time discussing these two data sets. In particular we 
will need to look at the various attributes in the data that can be used 
to enable tool selection and feed speed optimization for the CAM-Tooling 
pilot, and contour measurement and correction in the Made-to-Measure pilot.

As a reminder if you want to download the tool we will be using to view 
the data then you can do so from the following web site:
http://www.steptools.com/products/stepncmachine/download/

This tool has a free and locked version (in the same download). You will 
not need a key for the operations we will be performing on Monday.

Martin Hardwick
Team Leader ISO STEP-Manufacturing
President STEP Tools, Inc.
Professor of Computer Science RPI

1. Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. 
Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting


!DSPAM:14,51c4545f25094618097374!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20130624/5f223df2/attachment.html>