[step-manufacturing] Reminder: Conference call this Wednesday, February 20 at new Regular times

[Martin Hardwick]

All,

There is one small change to the agenda. The pdf for the discussion 
under item #3 has been expanded and the ftp for the new document is 
inserted below.

Martin


-------- Original Message --------
Subject: 	[step-manufacturing] Conference call this Wednesday, February 
20 at new Regular times
Date: 	Mon, 18 Feb 2013 12:20:17 -0500
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com <step-manufacturing at steptools.com>



All,

The next conference call will be this Wednesday February 20th at 7:00AM 
Pacific, 10:00AM Eastern, 3:00PM UK, 4:00PM Paris and 5:00PM Israel.

The proposed agenda is as follows:

1. Business case for STEP-NC Implementation by CAM vendors

At the OMAC meeting last week we drafted three white papers describing 
the STEP-NC business case for CAM vendors

a. New Bidding Opportunities for Small and Medium Enterprises (SME's) - 
An SME can respond to requests for bids more quickly and accurately when 
their CAM system has an integrated STEP-NC interface.
b. Easier CAM System Migration - A customer using a legacy CAM system 
with technical and business challenges can intelligently migrate to a 
more modern and functional solution using STEP-NC.
c. More Shop Floor Automation - New shop floor applications can 
integrate metrology and other sensor system data into a, standard, 
industry wide STEP-NC model and avoid the  complexities and inaccuracies 
caused by post processors.

2. Review web site and agenda for face to face meeting, hotel 
recommendation, food selections etc.

http://www.steptools.com/camxc/

3. Assembly models for manufacturing

New and old issues with respect to the modeling of assemblies for 
manufacturing and how to model the special constraints that may apply to 
one instance of a seal in a wheel assembly, or one fastener in an 
airframe assembly.

ftp://www.steptools.com/private/CAM_exchange/Cycle_1/chained_multi-level_vs_higer-lower_level_entities.pdf
NEW >>> 
ftp://www.steptools.com/private/CAM_exchange/Cycle_1/chassis_assembly_mlrd_shuo_sluo.pdf

Martin Hardwick
Team Leader ISO STEP-Manufacturing

1. Â Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Â Use your microphone and speakers (VoIP) - a headset is recommended. 
 Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting 
!DSPAM:14,512262e5207876900618484!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20130220/3090c41d/attachment.html>