[step-manufacturing] First survey results

[Martin Hardwick]

	Importance 	
	
	

	
	High 	Medium 	Low 	
	Responses 	Weighted
a. 	CAM to CAM data exchange 	5 	4 	
	
	9 	23
b. 	Automated tool assembly 	1 	3 	5 	
	9 	14
c. 	Automated feed speed 	4 	2 	3 	
	9 	19
d. 	Accuracy Prediction 	4 	2 	2 	
	8 	18
e. 	Closed loop machining 	4 	4 	1 	
	9 	21
f. 	Tape laydown and fiber placement 	
	3 	1 	
	4 	7

	
	
	
	
	
	
	

	On-machine measurement 	
	1 	
	
	
	

	MRP, MES, globalization 	1 	
	
	
	
	

	Fixture modeling 	
	1 	
	
	
	

	Collission detection 	
	
	1 	
	
	

	Computer Aided Tool Assembly 	
	1 	
	
	
	

	Computer Aided Feed Speed Opt 	
	1 	
	
	
	



On 9/20/2011 12:10 PM, Martin Hardwick wrote:
>
> All,
>
> The conference call this Friday will be a status review of the 
> responses to the Application Survey sent out earlier this week. If you 
> have not responded yet please send your replies before Friday.
>
> a. CAM to CAM data exchange
> b. Automated tool assembly
> c. Automated feed-speed optimization
> d. Accuracy prediction
> e. Closed loop machining
> f. Tape laydown and fiber placement
> g. Other (please specify)
>
> Martin
>
> 1.  Please join the meeting.
> https://www2.gotomeeting.com/join/285940474
>
> 2.  Use your microphone and speakers (VoIP) - a headset is 
> recommended.  Or, call in using your telephone.
>
> Australia: +61 (0) 2 6108 4655
> Austria: +43 (0) 7 2088 1403
> Belgium: +32 (0) 28 08 4294
> Canada: +1 (416) 800-9295
> Denmark: +45 (0) 69 91 88 65
> Finland: +358 (0) 942 41 5781
> France: +33 (0) 182 880 459
> Germany: +49 (0) 898 7806 6468
> Ireland: +353 (0) 14 845 979
> Italy: +39 0 699 36 98 81
> Netherlands: +31 (0) 208 080 382
> New Zealand: +64 (0) 4 974 7214
> Norway: +47 (0) 21 03 58 99
> Spain: +34 931 81 6669
> Sweden: +46 (0) 852 503 499
> Switzerland: +41 (0) 435 0167 09
> United Kingdom: +44 (0) 203 535 0610
> United States: +1 (914) 339-0034
>
> Access Code: 285-940-474
> Audio PIN: Shown after joining the meeting
> Meeting ID: 285-940-474
> !DSPAM:14,4e78baa1113701743814690!
>
>
> _______________________________________________
> step-manufacturing mailing list
> step-manufacturing at steptools.com
> http://lists.steptools.com/mailman/listinfo/step-manufacturing
>
>
> !DSPAM:14,4e78baa1113701743814690!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20110923/4d403a3e/attachment.html>