[step-manufacturing] Correction coordinates for Friday's call and another contribution

[Martin Hardwick]

All,

My apologies for  once again copying wrong connection information for 
the conference call. The correct information is below. In addition Xun 
Xu of the University of Auckland has sent us a paper on representing 
features for composites.

ftp://ftp.steptools.com/private/Composites/Xu_Feature_based_approach_for_representing_composite_components.pdf

1.  Please join the meeting.
https://www2.gotomeeting.com/join/285940474

2.  Use your microphone and speakers (VoIP) - a headset is recommended. 
  Or, call in using your telephone.

Australia: +61 (0) 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 898 7806 6468
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 (0) 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 203 535 0610
United States: +1 (914) 339-0034

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting
Meeting ID: 285-940-474

-------- Original Message --------
Subject: 	[step-manufacturing] Two papers for discussion on composites 
manufacturing
Date: 	Wed, 24 Aug 2011 10:22:20 -0400
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com <step-manufacturing at steptools.com>




All,

We have received two papers on modeling manufacturing resources for 
composites from Anna Valente and the team at the University of Bath. 
They are in a new directory along with the contributions made last week 
by Airbus and Boeing.

ftp://ftp.steptools.com/private/Composites/CONTRIBUTION_TO_STANDARDISATION.ppt
ftp://ftp.steptools.com/private/Composites/Cost_effective_visualization_of_advanced_composite_structures.ppt
ftp://ftp.steptools.com/private/Composites/Valente_DET2009_Hong_kong_december_2009.pdf
ftp://ftp.steptools.com/private/Composites/Valente_paper_CIRP_Annals_vol59_1_2010_pp441_444.pdf

Martin


-------- Original Message --------
Subject: 	RE: [step-manufacturing] Conference call this Friday will 
continue the discussion on composites manufacturing
Date: 	Wed, 24 Aug 2011 11:02:35 +0100
From: 	Stephen T. Newman <S.T.Newman at bath.ac.uk>
To: 	'Martin Hardwick' <hardwick at steptools.com>
CC: 	'Anna Valente' <anna.valente at itia.cnr.it>, 'Aydin Nassehi' 
<a.nassehi at bath.ac.uk>



Dear Martin

Following your email about the conference call and agenda.

Please find attached two papers relating to modelling composite
manufacturing processes undertaken by Dr Anna Valente of ITIA, while she was
working at Bath on a 6 months project funded by the Italian research
aerospace association CIRA.

I hope these might be valuable in your meeting.

Aydin will be in your meeting and was involved in this work and should be
able to give you the background.

Best Regards
  
Stephen
  
Stephen T Newman
Professor of Innovative Manufacturing Technology
&
Editor-in-Chief of the International Journal of Computer Integrated
Manufacturing
Department of Mechanical Engineering
University of Bath
Bath, UK
BA2 7AY
  
Email :S.T.Newman at bath.ac.uk
Tele: 01225 386934
Fax : 01225 386928

-----Original Message-----
From:step-manufacturing-bounces at steptools.com
[mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Martin
Hardwick
Sent: 23 August 2011 14:31
To:step-manufacturing at steptools.com
Subject: [step-manufacturing] Conference call this Friday will continue the
discussion on composites manufacturing


All,

The proposed agenda for this weeks conference call is to continue our
discussion on developing a model driven, manufacturing control interface for
tape layup and fiber placement machines.

1. Requirements
2. Testing
3. Projected benefits

Martin Hardwick
Team Leader ISO STEP-Manufacturing
Professor and Acting Head of Computer Science, RPI President STEP Tools,
Inc.




!DSPAM:14,4e5508c873119697815936!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20110825/7309e3d3/attachment.html>