[step-manufacturing] Renton Conference Call #4

[Martin Hardwick]

All,

The regular conference call is this Wednesday at the regular times. The 
proposed agenda is as follows:

1. Review the FARO arm measurement process - see the ongoing discussion 
on the central desktop at:

https://www.centraldesktop.com/p/ZgAAAAAAFZPR

2. Review the closed loop machining model.

In response to the availability of AP-203 output from the FARO arm the 
following modifications are proposed:

1. Add an as_measured attribute to executable so that a measured model 
can be associated with every executable (workingstep etc).
2. Delete the measurement_execution workingstep (but keep the 
measurement_evaluation workingstep).
3. Replace the measurement_relationship entity with its equivalent from 
AP-219

Martin

The weekly conference call is this Wednesday August 25 at 4:30PM France, 
10:30AM Eastern and 7:30AM Western . See below for connection information.

1.  Please join the meeting:
https://www2.gotomeeting.com/join/839991843

2.  Use your microphone and speakers (VoIP) - a headset is recommended. 
  Or, call in using your telephone.

Australia: +61 (0) 2 6108 4655
Austria: +43 (0) 7 20881403
Belgium: +32 (0) 28 08 4294
Canada: +1 416 800 9295
Switzerland: +41 (0) 435 0167 09
Germany: +49 (0) 898 7806 6468
Denmark: +45 69 91 88 65
Spain: +34 931816669
Finland: +358 942 415 781
France: +33 (0) 182 880 459
United Kingdom: +44 (0) 203 355 7649
Ireland: +353 (0) 14 845 979
Italy: +39 0699369881
Netherlands: +31 (0) 208 080 382
Norway: +47 21 03 58 99
New Zealand: +64 (0) 4 974 7214
Sweden: +46 (0) 852 503 499
United States: +1 914 339 0034
Access Code: 839-991-843
Audio PIN: Shown after joining the meeting

Meeting ID: 839-991-843
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20100823/8208c3c5/attachment.html>