[step-manufacturing] Renton Conference Call #2

Martin Hardwick hardwick at steptools.com
Mon Aug 9 10:27:12 EDT 2010


All,

The second conference call for the Renton round will be held this 
Wednesday at the usual times. See below for connection information. 
There will be several items to consider including the message below from 
Alain.

Martin

Hi Martin,

Despite the short delay to develop the Renton demo, I would suggest:

1 - you replace 2 opposite sides of the boxy by a NAS979 circle-square-diamond test part (one side as usual, the opposite one in hollow). Machining of this test part is well known and industry will be happy to see the integration of measuring devices (RENISHAW and FARO arm), to check the quality of machining and they will be more confident in AP238 functionalities.

2 - Is there some benefit to define setups that are rotated by 45° around the Z axis?
    - compensation of misalignement is more accurate?
    - greater acceleration, shorter time to speed up and down, x and y drives instead of only one?

3 - About the functionalities demonstrated, it will be interesting to produce an inspection record sheet to demonstrate the part machined complies with tolerances and quality requirements including the "as is" final AP203 file.

These points must be discussed before making the best decision.

Alain Brail
Albavis



1.  Please join the meeting.
https://www2.gotomeeting.com/join/907143043

2.  Use your microphone and speakers (VoIP) - a headset is recommended. 
  Or, call in using your telephone.

Australia: +61 (0) 7 3123 6029
Austria: +43 (0) 7 20881400
Belgium: +32 (0) 92 98 0592
Canada: +1 416 800 9289
Switzerland: +41 (0) 225 3314 51
Germany: +49 (0) 898 7806 6461
Denmark: +45 69 91 88 62
Spain: +34 911829782
Finland: +358 942 415 778
France: +33 (0) 182 880 456
United Kingdom: +44 (0) 203 355 7647
Ireland: +353 (0) 14 845 976
Italy: +39 0247921239
Netherlands: +31 (0) 208 080 379
Norway: +47 21 03 58 96
New Zealand: +64 (0) 4 974 7215
Sweden: +46 (0) 313 613 558
United States: +1 516 453 0011
Access Code: 907-143-043
Audio PIN: Shown after joining the meeting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20100809/38d530e1/attachment.html>


More information about the step-manufacturing mailing list