[step-manufacturing] Reminder conference call today

[Martin Hardwick]

Here is the "very simple" formula we propose to use for computing new feeds

after edit of flutes_count:
      feed_new = feed_old * (flutes_count_new / flute_count_old)

after edit of speed:
      feed_new = feed_old * (speed_new / speed_old)

Many thanks to Bengt Olsson


>All,
>
>The bi-weekly conference call is this Wednesday. See below for 
>connection information. The agenda is as follows.
>
>1. Review the procedure for computing machine specific speeds and 
>feeds. The latest version of the data has the maximum spindle speed 
>and tool flute count parameters set. There is a new version of the 
>explorer on our home page which you will need if you want to see the 
>new machine parameter and tool flute values.
>
>ftp://ftp.steptools.com/private/Bath/moldy_bath_metric_3axis_v2.238
>
>2. Review the Boxy data. There are three versions of the part - the 
>first has both setup's and the other two have one setup each. There 
>are wmv files for each setup. The wmv's are similar to the 
>simulation shown in the STEP-NC Explorer using Motion/Trunnion AC table.
>
>ftp://ftp.steptools.com/private/Bath/Boxy_Part_23-06-2009.238
>ftp://ftp.steptools.com/private/Bath/Boxy_Part_Setup_1.238
>ftp://ftp.steptools.com/private/Bath/Boxy_Part_Setup_2.238
>
>ftp://ftp.steptools.com/private/Bath/Boxy%20Part%20Setup%201.wmv
>ftp://ftp.steptools.com/private/Bath/Boxy%20Part%20Setup%202.wmv
>
>If you would like to review the Moldy or Boxy data you can do so 
>using a new NO-LICENSE-KEY version of the STEP-NC Explorer that is 
>now available on the web site. This no-license-key version has the 
>functionality of the regular version, except it will not save data.
>
>http://www.steptools.com/products/stepncmachine/download/
>
>Martin Hardwick
>Team Leader
>
>
>++++++++++++++++++++++++++++++++
>The bi-weekly conference call is this Wednesday July 1st at 4:30PM 
>France, 10:30AM Eastern and 7:30AM Western .. See below for 
>connection information.
>
>1.  Please join my meeting, Wednesday, July 1 at 4:30 PM W. Europe 
>Daylight Time.
><https://www1.gotomeeting.com/join/370619425>https://www1.gotomeeting.com/join/370619425
>
>2.  Use your microphone and speakers (VoIP) - a headset is 
>recommended.  Or, call in using your telephone. (Participant chooses 
>how to connect)
>
>Australia: +61 (0) 3 9001 1183
>Austria: +43 (0) 72088 0449
>Belgium: +32 (0) 92 98 0142
>France: +33 (0) 182 880 271
>Germany: +49 (0) 895 4998 6514
>Italy: +39 (0) 289 03 86 00
>Netherlands: +31 (0) 708 912 539
>New Zealand: +64 (0) 9 925 0408
>Spain: +34 (0) 925 67 0950
>Sweden: +46 (0) 101 992 528
>Switzerland: +41 (0) 225 3309 56
>United Kingdom: +44 (0) 203 355 7649
>United States: +1 914 339 0034
>Access Code: 370-619-425 and "#"
>Audio PIN: Shown after joining the meeting and "#" (this is 
>optional, but good to use in order to get a name connected to the voice)
>
>Meeting ID: 370-619-425
>!DSPAM:14,4a491401321182439521363!
>_______________________________________________
>step-manufacturing mailing list
>step-manufacturing at steptools.com
>http://lists.steptools.com/mailman/listinfo/step-manufacturing
>
>
>!DSPAM:14,4a491401321182439521363!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20090701/972ceb65/attachment.htm>