[step-manufacturing] Conf Call Reminder and slides on boxy

[Stroud Ian Anthony]

Dear Everyone,
Apologies for missing the meeting again, something came up at the last minute.
Best regards - Ian

--------------------------------------------------------------------
Ian Stroud
EPFL, STI-IGM-LICP,
Station 9, ME A1.393,
CH-1015 Lausanne,
Switzerland

Tel : +41 21 693 2949
FAX : +41 21 693 3553
http://licpwww.epfl.ch<http://licpwww.epfl.ch/>

Some links:
http://www.nextproject.eu/


________________________________
From: step-manufacturing-bounces at steptools.com [mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Martin Hardwick
Sent: mardi, 16. juin 2009 23:19
To: step-manufacturing at steptools.com
Subject: [step-manufacturing] Conf Call Reminder and slides on boxy


All

We also have some slides on the Boxy part to review. Many thanks to Magnus Lundgren of KTH.

ftp://ftp.steptools.com/private/Bath/Boxy_Part_Operations.ppt

Also an apology to those who tried to download the Moldy_bath data. We did not set the mime types correctly so IE and other browsers changed the file extension to ".zip" on download. The types have now been corrected so please try again, or switch the extension back to ".238" by hand for files that have already been downloaded. You will then be able to read them into the STEP-NC Explorer.

Martin Hardwick
Team Leader

At 08:06 PM 6/15/2009, Martin Hardwick wrote:

All,

The bi-weekly conference call is this Wednesday. See below for connection information. The agenda is as follows.

1. Review the Moldy for machining in July.

http://www.steptools.com/products/stepncmachine/samples/moldy/moldy_bath_metric_3axis_v1.238

2. Review the modified plan for the Bath demonstrations.

ftp://ftp.steptools.com/private/Bath/Bath_plan.ppt

If you would like to review the Moldy data you can do so using a new NO-LICENSE-KEY version of the STEP-NC Explorer that is now available on the web site. This no-license-key version has all of the functionality of the regular version, except it will not save data, so it cannot be used to save new or modified STEP-NC files. If you are a Development partner then you can get a key for the new version (V7) that will save data by sending us a license key request.

http://www.steptools.com/products/stepncmachine/download/

Martin Hardwick
Team Leader


++++++++++++++++++++++++++++++++
The bi-weekly conference call is this Wednesday June 17th at 4:30PM France, 10:30AM Eastern and 7:30AM Western .. See below for connection information.

1.  Please join my meeting.
https://www1.gotomeeting.com/join/980246432

2.  Use your microphone and speakers (VoIP) - a headset is recommended.  Or, call in using your telephone. (Participant chooses how to connect)

Australia: +61 (0) 3 9001 1183
Austria: +43 (0) 72088 0449
France: +33 (0) 182 880 271
Germany: +49 (0) 895 4998 6514
Italy: +39 (0) 289 03 86 00
New Zealand: +64 (0) 9 925 0408
Spain: +34 (0) 925 67 0950
Sweden: +46 (0) 101 992 528
Switzerland: +41 (0) 225 3309 56
United Kingdom: +44 (0) 203 355 7649
United States: +1 914 339 0034
Access Code: 980-246-432 and "#"
Audio PIN: Shown after joining the meeting and "#" (this is optional, but good to use in order to get a name connected to the voice)
!DSPAM:14,4a36e21d141301013111331!
_______________________________________________
step-manufacturing mailing list
step-manufacturing at steptools.com
http://lists.steptools.com/mailman/listinfo/step-manufacturing


!DSPAM:14,4a36e21d141301013111331!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20090618/f7f0ff16/attachment.htm>