[step-manufacturing] Minutes of thirteenth conference call

[Martin Hardwick]

All,

If you are planning to join us at the demonstration on May 14-15 in 
Washington State please register using the forms at:

http://www.steptools.com/library/stepnc/2009_renton/

Attendees
---------------
Martin Hardwick, STEP Tools
David Loffredo, STEP Tools
Mikael Hedlind, KTH
Magnus Lundgren, KTH
Bengt Olsson, Sandvik
Alain Brail, AlBavis
Fred Proctor, NIST
Chris Pfeifer, CCAT
David Odendahl, Boeing
Sid Venkatesh, Boeing


Apologies for absence
--------------------------------
Xun Xu, University of Auckland
Leon Xu, Boeing
Aydin Nassehi, University of Bath
Ian Stroud, EPFL
Larry Maggiano, Mitutoyo


1. Boeing is close to machining the first "real" part and will make 
sure Mitutoyo gets one so that they can get ready to make measurements.
2. Boeing is going to create AP-203 e2 data to describe the datums 
and surface finish requirements and will integrate this data into the 
AP-238 data for the moldy part.
3. We are going to have another brief call at the same time next week 
to check on progress.
4. 7 copies of the part are going to be made on 7 machines.
	3 at Boeing
	1 at CCAT
	1 at NIST
	1 at U.Bath (UK)
	1 at KTH (Sweden)

The next conference call will be held on Wednesday April 24th at the 
usual times. ONE WEEK EARLIER THAN USUAL.

Action items
------------------
1.   CCAT to ship a copy of the stock to KTH.
2.   Participants to machine the part