[step-manufacturing] Reminder: STEP Manufacturing conference call this Wednesday

[Martin Hardwick]

All,

The next conference call is on Wednesday December 10 - 4:30PM France, 
10:30AM Eastern USA and 7:30AM Western USA. This will probably be our 
last conference call until after the Christmas break.

Agenda:

1. Review of machine tool model and its implementation.
2. Discussion on how to simulate networks of machine tools.
3. Discussion on how to represent helix's in the YZ and ZX planes.
4. Review of test part selection and technical goals for the meeting.

A set of status slides are on the ftp site.
ftp://ftp.steptools.com/private/Vancouver/Status_slides_20081210.ppt

The machine tool model software has been updated slightly since it 
was first published to include checks for axis limits:
ftp://ftp.steptools.com/private/Vancouver/test_data/msim/

Martin Hardwick
Team Leader STEP-Manufacturing

Audio hosted by SANDVIK:
   -Dial one of the listed local numbers to join the meeting
       USA 1 866 488 7956
       Sweden: +46 (0) 8 5051 3879 or 0200 896 296
       Germany: +49 (0) 69 71044 5442 or 0800 101 2144
       UK: +44 (0)20 7153 9922 or 0800 358 4906
       France : +33 (0)1 70 99 43 46 or 0800 941 582
      Japan: 0044 2213 2777
       (additional local numbers: 
<https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf>https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf 
)
   -Enter Passcode: 959 6745 #

Wednesday, December 10 at 4:30 PM W. Europe Standard Time.
https://www2.gotomeeting.com/join/753954687

Meeting ID: 753-954-687

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20081209/2a51e4c2/attachment.htm>