[step-manufacturing] 2nd Conference call on Wednesday (Oct 29)

[Martin Hardwick]

All,

The second conference call for the 
Boeing/Vancouver round of testing is on this 
Wednesday October 29 at the usual times (4:30PM 
France, 10:30AM Eastern USA, 7:30AM Western USA).

Agenda.

1. Change of SC4 meeting dates to May 17-22.
2. Selection of test part for this round of testing:

The following models have been submitted by Mastercam

ftp://ftp.steptools.com/private/Vancouver/_MG_8351_jpg.jpg
ftp://ftp.steptools.com/private/Vancouver/image00260.jpg
ftp://ftp.steptools.com/private/Vancouver/image00334.jpg
ftp://ftp.steptools.com/private/Vancouver/mold2.bmp

3. Review of Scenario document.

The first draft of the document is at the following address:

ftp://ftp.steptools.com/private/Vancouver/t24-boeing-scenario.doc

The call in numbers and web site address are shown below.

Martin Hardwick
Team Leader STEP-Manufacturing

Audio hosted by SANDVIK:
   -Dial one of the listed local numbers to join the meeting
       USA 1 866 488 7956
       Sweden: +46 (0) 8 5051 3879 or 0200 896 296
       Germany: +49 (0) 69 71044 5442 or 0800 101 2144
       UK: +44 (0)20 7153 9922 or 0800 358 4906
       France : +33 (0)1 70 99 43 46 or 0800 941 582
      Japan: 0044 2213 2777
       (additional local numbers: 
<https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf>https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf 
)
   -Enter Passcode: 959 6745 #


GoToMeeting site for next conference call:

Wednesday, October 29 at 4:30 PM Västeuropa, normaltid at
https://www2.gotomeeting.com/join/329925527
Meeting ID: 329-925-527


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20081026/8b601595/attachment.htm>