[step-manufacturing] Day 2 schedule and connection information

[Martin Hardwick]

All,

On the first day of our meeting we milled the 
impeller and demonstrated both feed speed 
optimization and closed loop machining using STEP-NC.

For our second day we will be discussing how to 
improve the standard using the experiences gained 
from this demonstration and other demonstrations around the world.

KTH has supplied a GoTo meeting site. Sandvik has 
supplied a list of worldwide call in numbers.

The agenda for the second day is shown below. 
There has been one title change since yesterday. 
The first item for the morning will be a review 
of the current status of the technical 
corrigendum. The slides to be presented are at:

ftp://ftp.steptools.com/private/CCAT/review_of_stepnc_tc1.ppt

Martin Hardwick
Team Leader STEP-Manufacturing

GoToMeeting site:

Thursday, October 2 at 2:00 PM Västeuropa, normaltid at
https://www2.gotomeeting.com/join/810047196
Meeting ID: 810-047-196

Audio hosted by SANDVIK:
   -Dial one of the listed local numbers to join the meeting
       USA 1 866 488 7956
       Sweden: +46 (0) 8 5051 3879 or 0200 896 296
       Germany: +49 (0) 69 71044 5442 or 0800 101 2144
       UK: +44 (0)20 7153 9922 or 0800 358 4906
       France : +33 (0)1 70 99 43 46 or 0800 941 582
      Japan: 0044 2213 2777
       (additional local numbers: 
<https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf>https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf) 

   -Enter Passcode: 959 6745 #

Technical Discussions Day 2 - Thursday October 2nd

08:00AM                    Review of AP-238 Technical Corrigendum
                                     David Loffredo, STEP Tools, Inc

09:00AM                    Discussion of open issues
                                     Desirable extensions
                                     New work items
                                     Action items

10:00AM                    Break

10:30AM                    Case study; STEP-NC 
applied in heavy truck manufacturing
                         Mikael Hedlind, KTH
                                     Action items

11:00AM                    Interfacing ISO 13399 and STEP-NC
                                     Action items
                                     Bengt Olsson, Sandvik

12:00PM                    Lunch

01:00PM                    Machine tool modeling and simulation issues
                                     Performance and precision requirements
                                     Action items

01:30PM                    Measurement issues
                                     Curve probing
                                     Automating datum setup
                                     Action items

02:30PM                    Action items for SC1 meeting
                                     Martin Hardwick, STEP Tools, Inc.

03:00PM                    Break

03:30PM                    Plans for next meeting
                                     Location, schedule, technical targets

04:00PM                    Close of meeting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20081001/f78006be/attachment.htm>