[step-manufacturing] Conference call on Wed 24th September

[Martin Hardwick]

All,

What will probably be our final conference call 
before the meeting will take place at the usual 
times (4:30 PM France, 10:30AM Eastern, 7:30AM Western).

We will discuss the current status of the meeting preparations:

1. Machine set up at CCAT.
2. Machining and measurement testing at Boeing.
3. Feed speed generation using iCut.
4. Expenses for social event.

The latest software status slides are at: 
ftp://ftp.steptools.com/private/CCAT/Status_slides_20080924.ppt

The latest STEP-NC Explorer is at: 
ftp://ftp.steptools.com/private/CCAT/stepnc_5_38.msi

And the latest data sets are at: 
ftp://ftp.steptools.com/private/CCAT/demo_data/

There is also a set of slides reviewing the 
current status of the TC at: 
ftp://ftp.steptools.com/private/CCAT/review_of_stepnc_tc1.ppt
We will use these slides as the starting point 
for the technical review on Thursday next week.

Audio hosted by SANDVIK:
   -Dial one of the listed local numbers to join the meeting
       USA 1 866 488 7956
       Sweden: +46 (0) 8 5051 3879 or 0200 896 296
       Germany: +49 (0) 69 71044 5442 or 0800 101 2144
       UK: +44 (0)20 7153 9922 or 0800 358 4906
       France : +33 (0)1 70 99 43 46 or 0800 941 582
      Japan: 0044 2213 2777
       (additional local numbers: 
<https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf>https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf) 

   -Enter Passcode: 959 6745 #


Wednesday, September 24 at 4:30 PM Västeuropa, normaltid at
  https://www2.gotomeeting.com/join/846597075
Meeting ID: 846-597-075

GoToMeeting(TM)
Online Meetings Made Easy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20080923/39cc88bf/attachment.htm>