[step-manufacturing] Reminder Conference call on Wednesday February 6

[Martin Hardwick]

All,

A new version of the STEP-NC Explorer is on the ftp site. This 
version has a tool properties window that shows which tools are 
responsible for meeting each of the AP-203 e2 tolerances.

ftp://www.steptools.com/private/Sweden/stepnc_4_18.msi

The latest data for the Sandvik/Boeing feed speed demonstration is on 
the ftp site at:
ftp://www.steptools.com/private/Sweden/feed_speed_optimization/Sweden_override_20080109_opt_Bengt_high_feed.238
ftp://www.steptools.com/private/Sweden/feed_speed_optimization/Machining%20Related%20Data%20(2008-02-04).xls

The latest data for the Bordeaux/Airbus feed speed demonstration is 
on the ftp site at:
ftp://www.steptools.com/private/Sweden/feed_speed_optimization/Bordeaux/Bordeaux_opt_v1_20080204.238
ftp://www.steptools.com/private/Sweden/feed_speed_optimization/Bordeaux/Bordeaux_opt_v3_20080201.238

A new directory contains the first results for the traceability demonstration:
ftp://www.steptools.com/private/Sweden/Traceability/STEP%20MSA.doc
ftp://www.steptools.com/private/Sweden/Traceability/log2.png

The KTH/Scania closed loop machining demonstration is preparing data 
that uses the new connection between the tools and tolerances to 
compute compensations for the tool lengths and diameters when a gauge 
indicates a face is out of tolerance.
ftp://www.steptools.com/private/Sweden/closed_loop_machining/KTH_paths_and_geometry_sewn.238
ftp://www.steptools.com/private/Sweden/closed_loop_machining/DSC_0027_f.jpg

I look forward to talking with you tomorrow. The connect details for 
the call are copied below.

Martin Hardwick
Team Leader STEP-Manufacturing


>All,
>
>The conference call is this Wednesday, February 6th. The broad 
>agenda is as follows:
>
>1. Discuss status of Boeing/Sandvik feed speed optimization project.
>2. Discuss status of Airbus/Bordeaux feed speed optimization project.
>3. Discuss status of NIST/Vigo traceability project.
>4. Discuss status of KTH/Scania closed loop machining project.
>
>A more detailed agenda will be forthcoming when all of the test data 
>sets and results have been gathered and put onto the ftp site.
>
>Topic: March demo preparation
>Date: Wednesday, February 6, 2008
>Time: 4:30 pm, Europe Standard Time (GMT +01:00, Paris)
>Meeting number: 411 078 044
>Meeting password: 20080206
>
>http://airbus.webex.com
>
>Warning: I was advised that a new Webex release will be used but 
>date in unknown.
>It will be safe to enable access by every attendee using ie or firefox.
>
>Audio:
>Dial one of the listed local numbers to join the meeting
>                  USA 1-866-481-9887.
>                   Sweden: +46 (0) 8 503 163 00 or 0200 89 70 70
>                   Germany: +49 (0) 69 222 220 499 or 0800 000 1136
>                   UK: +44 (0) 207 107 0610 or 0800 376 5610
>                   France : 0800 778 455
>                   Enter Host-ID: 95967
>                   Enter PIN-code: 4544
>                   additional local numbers: http://local.meet24.com/>