Fw: Additional documents for the next WG7 meeting in Frankfurt

[¼­¼®È¯]

----- Original Message ----- 
From: ¼­¼®È¯ 
To: fglantschnig ; Slovensky, Len ; Stephen T Newman ; Alexander Schweiker ; Bernd Rommel ; Burkhard Rempp ; CADCAMation_Mr_Maeder ; Chiaki Sakamoto ; Erdos Gabor ; Frederick Proctor ; Jochen Wolf ; King G. Yee(Boeing) ; Mak Helium ; Martin Hardwick ; Peter Mueller ; Pietro Zanolari ; Stefan Heusinger ; Yong Tak Hyun 
Cc: step-manufacturing at steptools.com ; Pietro Cavaglia ; Nils Brouer ; Nick Zehnder ; Max Peter ; Luciano Lauro ; Howard Mason ; Gröpper ; Fr. Dr. Veronika Hrdliczka ; EPFL_Prof_Xirouchakis ; Daniel Thommen ; Daimler_Chrysler_Dr_Weyrich ; Charmilles_Mr_Crivelli ; Carl-Arthur Eder ; Christine Hermetet-Filez 
Sent: Friday, May 04, 2001 3:14 PM
Subject: Re: Additional documents for the next WG7 meeting in Frankfurt


Dear Mr. Glantschnig: 
 
Thank you very much for your email containing the ISW turning data model of April 9, 2001. 
 
(1) We have studied over it and made some comments as in the attached file
    (http://stepnc.postech.ac.kr/turning_analysis.doc). 
 
(2) I am also enclosing NRL-SNT's version of turning data model
    (http://stepnc.postech.ac.kr/NRL-SNT_turning_model.ppt). 
 
Both of the work is done as a part of the collaboration between ISW and NRL-SNT for the deliverables of Task 5.2 in IMS STEP-NC Project. I hope the above materials are helpful in establishing the new international standard for turning data model. I also hope I have an opportunity to present on this. 

(3) Finally, based on our difficulties encountered in using the curent ISO 14649 DIS- ballot version, I summarized comments which could be incorporated in the future version of ISO 14649. (http://stepnc.postech.ac.kr/ISO14649_Further_Propositions.ppt). 
 


Best regards


Suk-Hwan SUH 
------------------
Professor & Director 
National Research Lab for STEP-NC Technology (NRL-SNT) 
School of Mechanical & Industrial Engineering 
POSTECH, San 31, Hyoja-dong, Pohang, 790-784, KOREA 
Tel: +82-54-279-2196, Fax: +82-54-279-5998 
E-mail: shs at postech.ac.kr; http://stepnc.postech.ac.kr 


  ----- Original Message ----- 
  From: fglantschnig 
  To: Slovensky, Len ; Stephen T Newman ; Alexander Schweiker ; Bernd Rommel ; Burkhard Rempp ; CADCAMation_Mr_Maeder ; Chiaki Sakamoto ; Erdos Gabor ; fglantschnig ; Frederick Proctor ; Jochen Wolf ; King G. Yee(Boeing) ; Mak Helium ; Martin Hardwick ; Peter Mueller ; Pietro Zanolari ; Stefan Heusinger ; Yong Tak Hyun 
  Cc: Suk-Hwan SUH ; step-manufacturing at steptools.com ; Pietro Cavaglia ; Nils Brouer ; Nick Zehnder ; max.peter at snv.ch ; Luciano Lauro ; Howard Mason ; Gröpper ; Fr. Dr. Veronika Hrdliczka ; EPFL_Prof_Xirouchakis ; Daniel Thommen ; Daimler_Chrysler_Dr_Weyrich ; Charmilles_Mr_Crivelli ; Carl-Arthur Eder ; Christine Hermetet-Filez 
  Sent: Wednesday, April 11, 2001 11:50 PM
  Subject: Additional documents for the next WG7 meeting in Frankfurt


  11.04.2001

  Ladies and Gentlemen

  As attached files 2 new documents for the next meeting of WG7 in Frankfurt which have been send to me in the last days. I forward this documents as I received it. I hope you can read it.
  The document coming from the ISO CS in Geneva deals mainly with formal details, which must be regarded in the next documents send to CS.
  The other is the latest draft of Part 12 Turning, which will be viewed at the meeting.

  Please give me a short confirmation if you will attend the meeting, as we need this for the organization.

  Hoping to see you all in Frankfurt, I wish you nice Easter days.

  With friendly greetings

  F. Glantschnig
  Convener WG7

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.steptools.com/pipermail/step-manufacturing/attachments/20010504/f3e590b4/attachment.html